Macs ship with the display set at a certain resolution, and Apple defines this in the technical specifications for each model. But with Retina displays, these numbers can get confusing: there is the display’s resolution and the “looks like” resolution used on the Mac. Resolutions on Retina Macs look like half the actual number of pixels measured vertically and horizontally because of “pixel doubling.”

For example, if you have (as I do) a 5K iMac, the display resolution is 5120×2880, but the Displays pane of System Preferences tells me that it looks like 2560×1440.

That’s the default resolution, but you can change this if you want. To do so, you must first check Scaled in the Displays pane, as I have in the screenshot above, and you then see five options. These range from larger text to more space, with the Default setting in the middle.

The Display Menu application lives in your Mac’s menu bar and, depending on your Mac’s display configuration, it will allow you to effortlessly and rapidly change your display (s) resolution with.

If you have aging eyes or just want to see less on your display, try one of the settings to the left of the Default option. If you want to see more on the display—with smaller fonts, menus, etc.—then try one of the settings to the right. When you hover over one of these options, the Displays pane shows a text saying that “Using a scaled resolution may affect performance.” This is because your graphics card might not be able to keep up with a higher resolution (i.e., when things look smaller), or that some of your apps may not display correctly.

Mac Pro supports the following display configurations depending on the graphics cards installed. 6K displays Two Pro Display XDRs or 6K displays with resolutions of 6016 x 3384 at 60Hz when connected to a single Radeon Pro 580X MPX Module, Radeon Pro Vega II MPX Module, or Radeon Pro Vega II Duo MPX Module. If the menu bar icon is used to display application updates, set its behavior here as well. Bartender can display the icon briefly in the OS X menu bar before moving it back to the Bartender bar. There tend to be fewer options for OS X system icons, but you can still move them to the Bartender bar or hide them completely. Click on “Display” Under the ‘Display’ tab, hold down the OPTION / ALT key while you press on the ‘Scaled’ button alongside Resolution to reveal all available screen resolution options for the display Choose the resolution desired from the complete list of available screen resolutions, then close out of System Preferences as usual.

The 13-inch Retina MacBook Pro has a native resolution of 2560×1600 and uses a default “looks like” resolution of 1280×800. Things are a bit different with Apple’s 12-inch Retina MacBook. Its display has a resolution of 2304×1440, but the default “looks like” resolution it uses is not half that, but a bit more: 1280 x 800, just like the 13-inch MacBook Pro. So it looks like the same number of pixels, but on a display that’s one inch smaller diagonally. Naturally, these laptops offer other scaled options; each lets you choose from a total of four resolutions, from 1024×640 to 1440 900 (12-inch MacBook) or 1680×1050 (13-inch MacBook Pro).

If you have a second display connected to your Mac, you can choose a resolution for that display, also from the Displays pane of System Preferences. Select the display in the preference pane’s popup menu, then hold down the Option key and click the Scaled button to see your options.

Even more resolutions

Maybe you want even more choice in the resolution of your display. If so, you can use Many Tricks’ $3 Resolutionator. This utility lets you quickly switch resolutions without going to System Preferences, but also lets you choose from non-Retina resolutions. For example, in the screenshot below, you can see the options available on my 12-inch MacBook. I could choose to set its display to 2560×1600; that’s not the resolution that looks like half that, which is the default, but a resolution that actually uses using every pixel of the display.

Naturally, things are quite small at that resolution, so you probably won’t want to do this often, but there may be times when you want to keep your eye on several windows at a time, and only a high resolution like that will work.

When I work on my MacBook, I sometimes switch resolutions. When I’m focusing on writing, I use the native resolution, which makes texts large enough that I don’t need to strain, but if I have a lot of windows open, I sometimes go to a higher resolutions to get a broader view of what I’m doing. Try changing resolutions on your Mac; you may find that it’s easier to read texts, or that you can see more, than at the default resolution.

Automating Display Menu via AppleScript

Some of you have asked us for some way to change resolutions automatically when certain events happen: logging in as a different user, starting a screencasting software, or things as easy as pressing a keyboard shortcut. We have put a lot of thought into that problem, trying to figure out a solution that would be both flexible enough to accommodate for all these different scenarios but at the same time easy enough that every one of our users can benefit from this feature. Our solution was to make Display Menu Pro controllable via AppleScript. AppleScript is a simple scripting language that is built right into OS X, and it lets you easily create scripts that can fulfill all your automation needs. Check out our example scripts below, and have a look at our mini-tutorial that shows you how you can use AppleScript and Automator to create system wide shortcuts for switching between a number of different resolutions.

Display Menu Pro Macbook

Display Menu Pro Mac Free

Even more resolutions

Automating Display Menu via AppleScript

A simple script to toggle mirroring, for example, would look like this:

Display Menu Pro Mac Os

A little more interesting, perhaps, is this script to toggle between the 1680x1050 and 1024x768 resolutions: